14"

Showing 1–16 of 18 results

• Read more

  Arbor Tip Carving Bar : CCA-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 78 Drive Links, 0.325 Pitch = 62 Drive Links, 0.375/0.370 Pitch (Low Profile)= 55 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-14-50-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 14 Inches, .050 Gauge, 0.325 Pitch, 58 Drive Links

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-14-50-3LM – REPLACEABLE SPROCKET TIP, C1 Mount, 14 Inches, .050 Gauge, 0.370 Pitch (Low Profile), 51 Drive Links

• Read more

  Cannon SuperMini (Narrow Kerf) : CSM-C1-14-58-2 – REPLACEABLE SPROCKET TIP, C1 Mount, 14 Inches, .058 Gauge, 0.325 Pitch, 58 Drive Links

• Read more

  Dime Tip Carving Bar : CCD-C1-14-43 – C1 Mount, 14 Inches, .043 Gauge, 0.250 Pitch, 77 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Dime Tip Carving Bar : CCD-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge, 0.250 Pitch, 77 Drive Links – *MUST USE ¼” (0.250) pitch chain. Ensure a ¼” (0.250) Pitch Drive Sprocket is Available For Your Chainsaw before purchasing a dime tip bar.

• Read more

  Quarter Tip Carving Bar : C1 Mount, 14 Inches, .043 Gauge (0.250 Pitch = 78 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : C1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 78 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : H1 Mount, 14 Inches, .043 Gauge (0.250 Pitch = 76 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : H1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 76 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : S1 Mount, 14 Inches, .043 Gauge (0.250 Pitch = 76 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Quarter Tip Carving Bar : S1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 76 Drive Links, 0.325 Pitch = 61 Drive Links, 0.370 Pitch (Low Profile) = 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-C1-14-43 – C1 Mount, 14 Inches, .043 Gauge (0.250 Pitch = 77 Drive Links, 0.325 Pitch = 61 Drive Links, 0.375/0.370 Pitch (Low Profile)= 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-C1-14-50 – C1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 77 Drive Links, 0.325 Pitch = 61 Drive Links, 0.375/0.370 Pitch (Low Profile)= 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-H1-14-43 – H1 Mount, 14 Inches, .043 Gauge (0.250 Pitch = 77 Drive Links, 0.325 Pitch = 61 Drive Links, 0.375/0.370 Pitch (Low Profile)= 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain

• Read more

  Toonie Tip Carving Bar : CCT-H1-14-50 – H1 Mount, 14 Inches, .050 Gauge (0.250 Pitch = 77 Drive Links, 0.325 Pitch = 61 Drive Links, 0.375/0.370 Pitch (Low Profile)= 54 Drive Links) – *Please Ensure a 1/4″ (0.250) Pitch Drive Sprocket is Available For Your Chainsaw if You Wish to Run 1/4″(0.250) Pitch Chain