Cannon Beaver Bar

Product Highlights

  • Available in .404 pitch sprocket nose or hard nose versions
  • Available in 27″ Beaver and 33″ Otter versions
  • Precision squared and flame hardened rails for a long lasting bar
  • Available in standard .063 gauge
  • Precision ground groove

Cannon Beaver and Otter Bars are the ideal accessory for firewood processors. All Cannon bars are skillfully hand made and put through rigorous quality assurance checks prior to packaging.

These bars are constructed with custom alloy steel that is cold rolled, heat treated, annealed, stress relieved and surface ground. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

Precision squared and flame hardened/work hardened rails allow for chain to run straight and true enhancing the speed and smoothness of cut. An individually centered precision ground groove allows for even rail wear, increased rail strength and also reduces damage caused by pinches.

For firewood Processing, the Cannon Beaver Bar is “The Best Bar – Bar None!”®.

Cannon Carpenter Bar

Product Highlights

  • 3/8″ pitch .050″ gauge
  • 3/8″ low profile .050″ gauge
  • 3/8″pitch .063″ gauge
  • .404″pitch .063″ gauge
  • And the lengths are:  20″ and 24″

The unique features of the Carpenter Bars is that they have a very narrow profile and the bars have parallel rails; this means that the bottom of the cut is straight which is a big help when it comes to finishing and joining  lumber or logs together.

There are two sizes as well; one that cuts a 3″ top to bottom plunge cut hole and another that cuts a 4″ hole.

Also with the 3″ version, due to its very narrow profile it can be used for making curved cuts such as you might see over an arched door threshold in a log cabin.

Cannon Pruner Bar

Product Highlights

  • Available in 10″ and 12″ lengths
  • For use with pole saws
  • Precision squared and flame hardened rails for a long lasting bar
  • Available in standard .050 gauge
  • Precision ground groove

The Cannon Pruner Bar is skillfully handcrafted and put through rigorous quality assurance checks prior to packaging.

These bars are constructed with custom alloy steel that is cold rolled, heat treated, annealed, stress relieved and surface ground. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

Precision squared and flame hardened/work hardened rails allow for chain to run straight and true enhancing the speed and smoothness of cut. An individually centered precision ground groove allows for even rail wear, increased rail strength and also reduces damage caused by pinches.

Cannon Mounting Bars

Product Highlights

  • For use with augers winches and a variety of other attachments
  • Precision squared and flame hardened rails for a long lasting bar
  • Available in standard .063, 058 and .050 gauge
  • Precision ground groove

The Cannon Mounting Bars are skillfully handcrafted and put through rigorous quality assurance checks prior to packaging.

These bars are constructed with custom alloy steel that is cold rolled, heat treated, annealed, stress relieved and surface ground. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

Precision squared and flame hardened/work hardened rails allow for chain to run straight and true enhancing the speed and smoothness of cut. An individually centered precision ground groove allows for even rail wear, increased rail strength and also reduces damage caused by pinches.

More Information on the
Cannon Mounting Bars

The following flyer is in pdf format and shows more information about the mounting bars for augers and winches along with motor mount adaptor plates.